主要特点
双输出通道；
最大 500 MHz 输出频率；
2.4 GSa/s 采样率，16 位垂直分辨率；
脉冲频率高达 150 MHz；上升/下降时间可调，最快1ns；
TrueArb 技术，任意波长 2 ~ 20 Mpts；
IQ 信号、PRBS、噪声发生器。
6 合 1 信号发生器
·连续波形发生器 - 高达 500 MHz；
· 脉冲信号发生器 - 最快的上升和下降时间 1 ns，低抖动；
· 函数/任意波形发生器 - 6 个标准波形和多达 190 个内置任意波形；
· IQ 信号发生器 - 输出 IQ基带和 IF IQ 信号；
· 噪声信号发生器 - 输出带宽可调高斯白噪声；
· PRBS 发生器 - 输出比特率和边沿可调 PRBS 信号 。
创新的 EasyPulse 技术
使用传统的DDS技术，当采样率和输出频率不是整数倍时，会出现一个采样周期的抖动。有了 EasyPulse 技术，这个问题就可以完美解决。除输出低抖动方波和脉冲信号外，EasyPulse 技术还具有以下优点：
·脉冲频率高达 150 MHz；
·上升和下降时间可单独设置，最快 1 ns；
·脉冲宽度微调，低至 3.2 ns；
· Duty周期低至 0.001%；
·低抖动。
TrueArb 波形技术
TrueArb 技术相比传统 DDS 技术具有低抖动、低失真的优势。TrueArb 技术的特点是逐点输出任意波形。它不会泄露任何波形信息并具有其他优点：
· 20 Mpts 任意波形长度，保留更多细节；
· 16 位垂直分辨率，更高的信号保真度；
·使用标准 PC 软件 EasyWave 根据客户要求生成和输出任意波。
矢量信号源
SDG6000X 可以生成常用的 IQ 调制，例如 ASK、FSK、PSK 和 QAM。它可以用作 IQ 调制的基带源。
·载波频率高达 500 MHz；
·符号率高达 37.5 MSymb/s；
·标准 EasyIQ PC 软件可以生成多种 IQ 调制类型。
PRBS 函数
·提供PRBS3~PRBS32多模式输出；
·可预置多种逻辑电平如：TTL LVCMOS, LVPECL, LVDS；
·速率高达300 Mbps；
·可调上升和下降时间。
规格
| 带宽 | 200 MHz、350 MHz、500 MHz |
| 采样率 | 2.4 GSa/s（2X 插值） |
| 频道 | 2 |
| 垂直分辨率 | 16 位 |
| 任意波形长度 | 2 ~ 20 Mpts |
| 展示 | 4.3 英寸触摸屏显示器，480 x 272 x RGB |
| 界面 | 标准：USB Host、USB Device、LAN
可选：GPIB（USB-GPIB 适配器） |
Frequency |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Resolution | 1μ | Hz |
|
Initial accuracy | -1 |
| +1 | ppm | 25℃ |
-2 |
| +2 | ppm | 0~40℃ |
1st-year aging | -1 |
| +1 | ppm | 25℃ |
10-year aging | -3.5 |
| +3.5 | ppm | 25℃ |
Sine |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Frequency | 1μ |
| 500M | Hz | SDG6052X |
1μ |
| 350M | Hz | SDG6032X |
1μ |
| 200M | Hz | SDG6022X |
Harmonic distortion |
|
| -65 | dBc | 0 dBm, 0~1 MHz ( included ) |
|
| -60 | dBc | 0 dBm, 1~60 MHz ( included ) |
|
| -50 | dBc | 0 dBm, 60~100 MHz ( included ) |
|
| -40 | dBc | 0 dBm, 100~200 MHz ( included ) |
|
| -30 | dBc | 0 dBm, 200~300 MHz ( included ) |
|
| -28 | dBc | 0 dBm, above 300 MHz |
Total Harmonic Distortion |
|
| 0.075 | % | 0 dBm, 10 Hz ~ 20 kHz |
Non-harmonic spurious |
|
| -60 | dBc | 0 dBm, ≤350 MHz |
|
| -55 | dBc | 0 dBm, >350 MHz |
Output Range (Note) | 2m |
| 20 | Vpp | ≤ 40 MHz, HiZ load |
2m |
| 10 | Vpp | 40 MHz ~ 120 MHz ( included ), HiZ load |
2m |
| 5 | Vpp | 120 MHz ~ 160 MHz ( included ), HiZ load |
2m |
| 3 | Vpp | 160 MHz ~ 350 MHz ( included ), HiZ load |
2m |
| 1.28 | Vpp | above 350MHz, HiZ load |
Harmonics Order |
|
| 10 |
|
|
Type | Even, Odd, All |
|
Pulse |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Frequency | 1μ |
| 150 M | Hz | SDG6052X, SDG6032X |
1μ |
| 80 M | Hz | SDG6022X |
Pulse Width | 3.3 |
|
| ns | SDG6052X, SDG6032X |
3.4 |
|
| ns | SDG6022X |
Pulse width resolution | 100 | ps |
|
Pulse width accuracy |
|
| ±(0.01%+0.3ns) |
|
|
Rise time ( setting range ) | 1n |
| 75 | s | SDG6052X, SDG6032X 10% ~ 90%, 100 ps resolution |
2n |
| 75 | s | SDG6022X 10% ~ 90%, 100 ps resolution |
Fall time (setting range ) | 1n |
| 75 | s | SDG6052X, SDG6032X 90% ~ 10%, 100 ps resolution |
2n |
| 75 | s | SDG6022X 90% ~ 10%, 100 ps resolution |
Rise time (specified range) | 2n |
| 75 | s | 10% ~ 90%, 100 ps resolution. Overshoot, jitter, output range and pulse width accuracy specifications are only guaranteed in specified rise/fall times range |
Fall time (specified range) | 2n |
| 75 | s |
Rise/fall times resolution | 100 | ps |
|
Overshoot |
|
| 3 | % | 100 kHz, 1 Vpp, 50Ω load , 2 ns edge |
Duty cycle | 0.001 |
| 99.999 | % | Limited by frequency setting |
Duty cycle resolution | 0.001 | % |
|
J i tter ( rms) cycle to cycle |
|
| 100 | ps | 1 Vpp, 50Ω load |
Output Range (Note) | 2m |
| 20 | Vpp | ≤ 20 MHz, HiZ load , 2ns edge , ≥ 10 ns width |
2m |
| 10 | Vpp | 20 MHz ~ 120 MHz ( included ), HiZ load , 2ns edge , ≥ 10 ns width |
2m |
| 5 | Vpp | Above 120 MHz , HiZ load , 2ns edge , ≥ 10 ns width |
Square |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Frequency | 1μ |
| 120M | Hz | SDG6052X, SDG6032X |
1μ |
| 80M | Hz | SDG6022X |
Rise /fall times |
| 2 | 2.4 | ns | 10% ~ 90%, 1 Vpp, 50Ω load |
Overshoot |
|
| 3 | % | 100 kHz, 1 Vpp, 50Ω load |
Duty cycle | 10 |
| 90 | % | Limited by frequency setting |
J i tter ( rms) cycle to cycle |
|
| 100 | ps | 1 Vpp, 50Ω load |
Output Range (Note) | 2m |
| 20 | Vpp | ≤ 20 MHz, HiZ load |
2m |
| 10 | Vpp | Above 20 MHz , HiZ load |
Ramp |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Frequency | 1μ |
| 5M | Hz |
|
Symmetry | 0 |
| 100 | % |
|
Linearity |
|
| 1 | % | Percentage of peak output, 1 kHz, 1 Vpp, 50% symmetry |
Output Range (Note) | 2m |
| 20 | Vpp |
|
Noise |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Bandwidth (-3dB) |
| 500 |
| MHz | SDG6052X |
| 350 |
| MHz | SDG6032X |
| 200 |
| MHz | SDG6022X |
Bandwidth setting range | 1m |
| BW | Hz | BW is the max. frequency |
Output Range (Note) | 2m |
| 1.084 | Vrms | Mean = 0 Bandwidth limit = OFF |
Arbitrary Wave |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Frequency setting range | 1μ |
| 50M | Hz |
|
Waveform length | 2 |
| 20M | pts |
|
Sampling rate | 1u |
| 300M | Sa/s | TrueArb mode |
1.2G | Sa/s | DDS mode |
Vertical resolution |
| 16 |
| bit |
|
Rise/fall times |
| 2.6 |
| ns | 10% ~ 90%, 1Vpp step signal , DDS mode |
J i tter (rms) cycle to cycle |
|
| 100 | ps | 1 Vpp, 50Ω load , TrueArb mode |
Output Range (Note) | 2m |
| 20 | Vpp | ≤ 20 MHz, HiZ load |
2m |
| 10 | Vpp | Above 20 MHz , HiZ load |
DC |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Output Range | -10 |
| 10 | V | HiZ load |
-5 |
| 5 | V | 50Ω load |
Accuracy |
|
| ±(1%+2mV) |
| HiZ load |
IQ (optional) |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Symbol rate | 250 |
| 37.5M | Symb/s | Limited by the oversampling factor |
Vertical resolution | 16 | bit |
|
Modulation type | 2ASK, 4ASK, 8ASK, BPSK, QPSK, 8PSK, DBPSK, DQPSK, D8PSK, 8QAM, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 2FSK, 4FSK, 8FSK, 16FSK, MSK, MultiTone, custom | Supported by EasyIQ software |
Pattern | PN7, PN9, PN15, PN23, User file, Custom | Supported by EasyIQ software |
Output Range | 1m |
| 0.5 | Vrms | , 50Ω load |
Carrier frequency |
|
| 500M | Hz | SDG6052X |
|
| 350M | Hz | SDG6032X |
|
| 200M | Hz | SDG6022X |
PRBS |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Bit rate | 1u |
| 300M | bps | SDG6052X, SDG6032X |
1u |
| 160M | bps | SDG6022X |
Sequence length | 2m-1, m = 3, 4, ... , 32 |
|
Rise/fall times | 1n |
| 1u | s | SDG6052X, SDG6032X. 10% ~ 90%, 1 Vpp, 50Ω load |
2n |
| 1u | s | SDG6022X. 10% ~ 90%, 1 Vpp, 50Ω load |
Output Range (Note) | 2m |
| 20 | Vpp | ≤ 40 Mbps, HiZ load , |
2m |
| 10 | Vpp | 40 ~ 240 Mbps ( included ), HiZ load |
2m |
| 5 | Vpp | Above 240 Mbps , HiZ load |
Output |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Accuracy | ±(1%+1mVpp) | 10 kHz sine, 0 V offset |
Amplitude flatness | -0.3 |
| +0.3 | dB | 50Ω load, 0.5 Vpp, compare to 1MHz Sine |
Output impedance | 49.5 | 50 | 50.5 | Ω | 100 kHz sine |
Output current | -200 |
| 200 | mA |
|
Crosstalk |
|
| -60 | dBc | CH1=CH2=0 dBm, Sine, 50 Ω load |
Protection | Current limiting, Over voltage protection |
|
Current-limit threshold |
| ±200 |
| mA |
|
Over voltage protection threshold | ±3.5 | ±4 | ±4.5 | V | The amplitude of the generator <3.2Vpp and the DC offset <|2VDC| |
±10.5 | ±11 | ±11.5 | V | The amplitude of the generator ≥3.2Vpp or the DC offset ≥|2VDC| |
Modulation |
AM |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Carrier | Sine, Square, Ramp, Arb |
Modulation source | Internal/External |
|
Modulation wave | Sine, Square, Ramp, Noise, Arb |
Modulation depth | 0 |
| 120 | % |
|
Modulation frequency | 1m |
| 1M | Hz | While modulation source is “Internal” |
FM |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Carrier | Sine, Square, Ramp, Arb |
Modulation source | Internal/External |
|
Modulation wave | Sine, Square, Ramp, Noise, Arb |
Frequency deviation | 0 |
| 0.5*BW |
| BW is the max. frequency. Limited by frequency setting |
Modulation frequency | 1m |
| 1M | Hz | While modulation source is “Internal” |
PM |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Carrier | Sine, Square, Ramp, Arb |
Modulation source | Internal/External |
|
Modulation wave | Sine, Square, Ramp, Noise, Arb |
Phase deviation | 0 |
| 360 | ° |
|
Modulation frequency | 1m |
| 1M | Hz | While modulation source is “Internal” |
ASK |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Carrier | Sine, Square, Ramp, Arb |
Modulation source | Internal/External |
Modulation wave | Square with 50% duty cycle |
Keying frequency | 1m |
| 1M | Hz | While modulation source is “Internal” |
FSK |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Carrier | Sine, Square, Ramp, Arb |
Modulation source | Internal/External |
Modulation wave | Square with 50% duty cycle |
Keying frequency | 1m |
| 1M | Hz | While modulation source is “Internal” |
PSK |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Carrier | Sine, Square, Ramp, Arb |
Modulation source | Internal/External |
Modulation wave | Square with 50% duty cycle |
Keying frequency | 1m |
| 1M | Hz | While modulation source is “Internal” |
PWM |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Carrier | Pulse |
Modulation source | Internal/External |
Modulation wave | Sine, Square, Ramp, Noise, Arb |
Modulation frequency | 1m |
| 1M | Hz | While modulation source is “Internal” |
Burst |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Carrier | Sine, Square, Ramp, Pulse, Noise, Arb |
Type | Count (1-1000000 periods), Infinite, Gated |
Carrier frequency | 2m |
| BW | Hz | BW is the max. output frequency |
Start/Stop phase | 0 |
| 360 | ° |
|
Internal period | 1μ |
| 1000 | s |
|
Trigger source | Internal, External, Manual |
Gated source | Internal/External |
Trigger delay |
|
| 100 | s |
|
Sweep |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Carrier | Sine, Square, Ramp, Arb |
Type | Linear, Logarithmic |
|
|
Direction | Linear: Up, Down, Up & Down Logarithmic: Up, Down |
Carrier frequency | 1μ |
| BW | Hz | BW is the max. output frequency |
Sweep time | 1m |
| 500 | s |
|
Trigger source | Internal, External, Manual |
Frequency Counter |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Function | Frequency, Period, Positive/Negative Pulse Width, Duty Cycle |
Coupling mode | AC, DC, HF REJ |
Frequency range | 100m |
| 400M | Hz | DC coupling |
Input amplitude | 1 |
| 400M | Hz | AC coupling |
100mVrms |
| ±2.5V |
| DC coupling , < 100 MHz |
200mVrms |
| ±2.5V |
| DC coupling , 100 MHz ~ 200MHz |
500mVrms |
| ±2.5V |
| DC coupling , Above 200 MHz |
100mVrms |
| 5 Vpp |
| AC coupling , < 100 MHz |
200mVrms |
| 5 Vpp |
| AC coupling , 100 MHz ~ 200MHz |
500mVrms |
| 5 Vpp |
| AC coupling , Above 200 MHz |
Input impedance |
| 1M |
| Ω |
|
Reference Clock |
10MHz Input |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Frequency | 9.999M | 10M | 10.001M | Hz |
|
Amplitude | 1.4 |
|
| Vpp |
|
Input impedance | 5 |
|
| kΩ | AC coupling |
10MHz Output |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Frequency |
| 10M |
| Hz | Synchronized to internal reference clock |
Amplitude | 2 | 3.3 |
| Vpp | HiZ load |
Output impedance |
| 50 |
| Ω |
|
Auxiliary In/Out |
|
Trigger Input |
|
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
|
VIH | 2 |
| 5.5 | V |
|
|
VIL | -0.5 |
| 0.8 | V |
|
|
Input impedance | 100 |
|
| kΩ |
|
|
Pulse width | 100 |
|
| ns |
|
|
Response time |
|
| 100 | ns | Sweep |
|
|
| 600 | ns | Burst |
|
Trigger Output |
|
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
|
VOH | 3.8 |
|
| V | IOH = –8 mA |
|
VOL |
|
| 0.44 | V | IOL = 8 mA |
|
Output impedance |
| 100 |
| Ω |
|
|
Frequency |
|
| 1 | MHz |
|
|
Sync Out |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
VOH | 3.8 |
|
| V | IOH = –8 mA |
VOL |
|
| 0.44 | V | IOL = 8 mA |
Output impedance |
| 100 |
| Ω |
|
Pulse width |
| 26.7 |
| ns |
|
Jitter |
| 3.3 |
| ns | Peak to peak |
Frequency |
|
| 10 | MHz |
|
Modulation Input |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Frequency | 0 |
| 50 | kHz |
|
Input impedance | 10 |
|
| kΩ |
|
Amplitude @100% modulation depth | 11 | 12 | 13 | Vpp |
|
General |
Power |
Parameter | Min | Typ | Max | Unit | Condition |
Voltage | 100 - 240 Vrms (± 10%), 50 / 60 Hz 100 - 120 Vrms (± 10%), 400 Hz |
Power consumption |
| 32.5 | 50 | W | Dual channels, Sine, 1kHz, 10Vpp, 50Ω load |
Display |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Color depth |
| 24 |
| bit |
|
Contrast Ratio |
| 350:1 |
|
|
|
Luminance |
| 300 |
| cd/m2 |
|
Touch Screen Type | Resistive |
|
Environment |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Operating temperature | 0 |
| 40 | ℃ |
|
Storage temperature | -20 |
| 60 | ℃ |
|
Operating humidity | 5 |
| 90 | % | ≤ 30 ℃ |
5 |
| 50 | % | 40 ℃ |
Non -operating humidity | 5 |
| 95 | % |
|
Operating altitude |
|
| 3048 | m | ≤ 30 ℃ |
Non –operating altitude |
|
| 15000 | m |
|
Calibration |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Calibration interval |
| 1 |
| year |
|
Mechanical |
Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
Dimensions | W×H×D = 260.3mm×107.2mm×295.7mm |
Net weight |
| 3.5 |
| kg |
|
Gross weight |
| 4.6 |
| kg |
|
Compliance |
LVD | IEC 61010-1:2010 |
EMC | EN61326-1:2013 |
Product Description |
SDG6052X | 500 MHz, 2-CH, 2.4 GSa/s, 16-bit |
SDG6032X | 350 MHz, 2-CH, 2.4 GSa/s, 16-bit |
SDG6022X | 200 MHz, 2-CH, 2.4 GSa/s, 16-bit |
Standard Configurations |
Quick start ×1 |
Power cord ×1 |
Calibration certificate ×1 |
USB cable ×1 |
BNC coaxial cable x2 |
Optional Configurations |
SPA1010 | 10W Power Amplifier |
ATT-20dB | 20 dB Attenuator |
USB-GPIB | USB-GPIB Adapter |
SDG-RMK | Single Instrument Rack Mount Kit |
SDG-6000X-IQ | IQ Signal Generator Function |
